Chinese
CS series single-cylinder cone crusher
Model: CS Series
Minimum order: 180
Wheelbase: 2500mm
Weight: 360kg
Function: High crushing efficiency
The CS series single-cylinder cone crusher is a cone crusher integrating mechanical, hydraulic, electrical, automation and intelligent control technologies. It is widely used in medium, fine and ultra-fine crushing operations in industries such as metal and non-metallic minerals, cement, sand and gravel, and metallurgy. This cone crusher features high crushing efficiency, low production cost, convenient maintenance and adjustment, good particle shape of crushed products, compact design, small installation space, and can effectively save infrastructure costs.
Working principle
The CS series single-cylinder hydraulic cone crusher is mainly composed of the upper frame, middle frame (medium crushing type), lower frame, moving cone part, eccentric sleeve part, transmission part, hydraulic cylinder part and other components. During operation, the horizontal shaft is driven to rotate by the motor. The horizontal shaft then drives the eccentric sleeve to rotate through gears, and the eccentric sleeve then drives the moving cone part to perform circular swinging, thereby achieving continuous extrusion and crushing of stones. By adjusting the hydraulic cylinder at the bottom of the moving cone, the moving cone can move up and down, thus conveniently adjusting the size of the ore discharge port and the particle size of the product. At the same time, the hydraulic cylinder also provides an over-iron protection function. When an object that cannot be crushed (such as an iron block) enters the crushing chamber, the hydraulic cylinder automatically lowers the moving cone to release the iron block and protect the cone crusher. After the foreign object is discharged, the moving cone automatically returns to its original position. The crusher resumed working condition and continued the crushing operation.
Technical parameters of CS series single-cylinder cone crusher
Model | Type of crushing cavity | Feeding port size | Size of the discharge port | Power | Output |
CS420 | S1(Super Thick) | ≤240 | ≥22 | 90 | 80-170 |
S2(Medium bold) | ≤200 | ≥19 | 70-130 | ||
H1(Detailed) | ≤135 | ≥10 | 45-130 | ||
H2(Medium Fine) | ≤65 | ≥8 | 35-80 | ||
H3(Ultrafine) | ≤38 | ≥4 | 27-60 | ||
CS430 | S1(Super Thick) | ≤360 | ≥25 | 160 | 120-345 |
S2(Medium bold) | ≤300 | ≥22 | 105-305 | ||
S3(Bold) | ≤235 | ≥19 | 90-275 | ||
H1(Detailed) | ≤185 | ≥13 | 66-210 | ||
H2(Medium Fine) | ≤90 | ≥10 | 65-165 | ||
H3(Ultrafine) | ≤50 | ≥6 | 48-105 | ||
CS440 | S1(Super Thick) | ≤450 | ≥35 | 250 | 255-605 |
S2(Medium bold) | ≤400 | ≥29 | 215-515 | ||
S3(Bold) | ≤300 | ≥25 | 190-490 | ||
H1(Detailed) | ≤215 | ≥16 | 110-395 | ||
H2(Medium Fine) | ≤110 | ≥13 | 115-340 | ||
H3(Ultrafine) | ≤70 | ≥8 | 90-255 | ||
CS660 | S1(Super Thick) | ≤560 | ≥41 | 315 | 335-1050 |
S2(Medium bold) | ≤500 | ≥38 | 305-895 | ||
H1(Detailed) | ≤275 | ≥16 | 170-665 | ||
H2(Medium Fine) | ≤135 | ≥16 | 190-505 | ||
H3(Ultrafine) | ≤65 | ≥13 | 205-320 | ||
CS980 | S1(Super Thick) | ≤600 | ≥70 | 800-1800 | |
S2(Medium bold) | ≤420 | ≥50 | 630 | 700-1500 | |
H1(Detailed ) | ≤350 | ≥30 | 600-1300 | ||
H2(Medium Fine) | ≤300 | ≥30 | 500-1200 | ||
H3(Ultrafine) | ≤180 | ≥25 | 500-1000 |
Note: The product is constantly being upgraded. If there are any changes in parameters, please refer to the actual product
Send Inquiry